Prevent Hidden Brake Failures With Proactive Checks

Cost Savings

Checklist Tasks

• Inspect brake pads for uneven wear to catch caliper or hardware faults early.
• Check rotors for blue spots or cracks to detect overheating before failure occurs.
• Test pedal firmness after starting engine to reveal master cylinder or booster leaks.
• Examine brake hoses for bulges or cracks to prevent sudden loss of brake pressure.
• Use a fluid tester to check moisture and replace fluid above 2% to stop corrosion.
• Verify parking brake holds on an incline to catch cable stretch or caliper seizing.
• Inspect ABS sensor wiring at hubs for damage to avoid false ABS activation.
• Check caliper slide pins for rust and lubricate to prevent sticking brakes.
• Look for fluid seepage at wheel cylinders or pistons to prevent brake loss.
• Measure rotor thickness at several points to catch warping before vibration starts.
• Confirm all hardware clips and springs are seated to prevent noise and uneven wear.
• Test brake lights for delays or flickers to catch switch or wiring faults early.